2019 J/Boats J/121

Specifications

Equipment & Extras

LOA

40ft/12m

Rig

Sloop

Hull

Glass Reinforced Plastic

Keel

Fin Keel

Make

J/Boats

Name

BEAR

Year

2019

Class

Performance Sail

Drive

Sail Drive

Model

J/121

Engine

Single Diesel

Layout

Aft Cockpit

Ancasta Ref

48349

• Two Tone Deck
• Thurston Cockpit Dodger with Side Curtains
• Offshore Companionway Racing Dodger
• Opening Ports (2) on aft face of cabin house
• Remote Hydraulic Backstay in lieu of standard
• 110 VAC Shore Power system, 30’ cord, 2 outlets, battery charger, equipment leakage circuit interrupter (ELCI), and galvanic isolator
• DC Refrigeration
• Additional 105 amp Group 31 battery
• Factory custom Hanging bar in forepeak to starboard
• Factory custom Standard Stove delete-replaced with carbon veneer full counter top, varnished fiddle and shelf
• Systems Group – Hot & cold pressure water system with extendable shower in aft head
• Cockpit Shower (requires Systems Group)
• Jefa Auto-pilot Direct Drive Kit (Unit DU-DD1)
• Canvas & Cover Package: Wheel/Pedestal covers in Sunbrella (2); Padded WeatherMax lower lifeline covers (4); Mainsail cover in Sunbrella with J/121 Logo. Covers for all winches and hatches
• Double door option. Decolite cored FRP doors finished in gelcoat to match the hull. Removable
• Upgraded Lithium batter for offshore safety and longevity
• Upgraded to higher capacity inverter
• Radar
• Axxon Spars carbon fiber, auto-clave cured mast with double swept back, carbon fiber spreaders and backstay crane
• Axxon Spars carbon fiber, racing boom with 12:1 internal outhaul, one mainsheet block bale, vang lug, and sheaves for two reef lines and outhaul
• Carbon fiber bow sprit with internal bearing system and black painted finish
• Fully extended position is supported by a Dyneema bobstay
• Stored position is retracted aft of the stem for safer docking
• Mast/boom finished in black with contrasting white measurement bands
• Nitronic 50 discontinuous rod rigging package including shrouds and forestay
• DSK-90 Dyneema backstay connected to Harken integral hydraulic backstay adjuster operable on centre line aft of the helm
• Low-profile, Ubi Maior Jiber headsail furling system with continuous control line led to the cockpit
• Flush shroud terminations with adjustable open body shroud turnbuckles
• Rigid boom vang with control lines led P&S to cockpit
• Sheaves for : Mainsail Inner jib/staysail - Integral halyard lock 2 x Jib & 2 spinnaker halyards
• Antal mast track and loader gate
• Steaming/foredeck light
• Masthead anchor/Tri-color light
• Internal wiring conduit
• Mast upgraded to triple slot and stay sail
• Race running rigging package Included with assorted older spares
• 2023 Sail inventory: Quantum light jib North 3Di Mainsail Quantum Code 55 Quantum A3
• 2022 Sails: North 3Di Medium jib North 3Di Light Air Jib A1.5 UK Genoa Staysail
• 2021 Sails: A 1.5 A 2 A 3 (Very light use-in great shape) A 4 Spinnaker Staysail
• 2020 Sails: North 3Di Lt./Med Jib, Lt. Jib Code 0
• 2019 Sails: North 3Di Medium jib A2 North 3Di Mainsail North 3Di J4
• 2018 Sails: Delivery Main Dacron 3Di A5 A3
• Harken Performa 52:1 self-tailing primary winches
• Harken Performa 46:1 self-tailing cabin top winches
• Harken Performa 46:1 self-tailing mainsheet winches
• Four Harken One-touch winch handles
• Adjustable jib jead system with floating lead blocks and inhaul and outhaul capability
• Cascading cunningham system led to cockpit
• Harken spinnaker sheet and tack line blocks
• Bow-sprit control system led externally to clutch mounted on cabin top
• Mast base halyard blocks and organizers
• Halyard & tack line rope clutches
• Custom mast collar with attachment points for halyard and mast base blocks, and halyard bale
• Stainless cabin top handrails P&S
• Tapered SS lifeline stanchions
• Forward stanchion with integral roller (P&S) for quick jib skirting
• Double 1×19 stainless wire lifelines to meet all categories of the Offshore Special Regulations (OSR)
• Custom bow pulpit and dual corner stern rails with LED navigation lights
• Four 4-bolt SS mooring cleats/eyes
• Interior ventilation from four framed opening ports in sides of cabin trunk, one offshore skylight deck hatch aft of mast, and one large offshore deck hatch forward of the mast
• Acrylic offshore drop-board with inside/outside lockable hasp
• Four polypropylene mesh line bags
• Custom SS forestay, shroud and backstay chainplates
• 104 gallon (per side) seawater ballast system with molded tanks, transfer valves and overboard drain
• 24-gallon fuel tank with baffles and inspection port
• 12-gallon head holding tank
• Raritan PH-II head with deck pump-out
• Manual fresh water system with 26-gallon water tank and manual pumps and spigots in the galley and head
• Cockpit operated manual bilge pump
• Two 105 amp deep-cycle, Group 31 sealed AGM batteries
• Three position battery switch
• Electrical panel w/circuit breakers
• Bonding system
• Five low profile, LED reading lights
• One adjustable red/white light in Nav station
• Six red/white LED dome lights
• Automatic bilge pump with manual/auto panel switch
• Below deck OSR manual bilge pump
• B&G H5000 System: Zeus 3S 16 chartplotter with C-MAP cartography
• HV Displays-4 masts displays
• H5000 Graphic Display- 2 displays
• Halo20+ Radar
• V60 VHF radios with AIS integration
• H60 wireless handset
• Load cell for headstay, Vang
• Yanmar keyless digital B instrument panel mounted in recess on cockpit wall near wheel
• Gori two-blade, geared folding prop
• Spinlock flush mount engine throttle control with removable handle and neutral safety switch
• Balanced spade, composite rudder with stainless rudder post mounted in self aligning, Jefa rudder bearings
• Jefa twin pedestal steering system including sheaves, radial drive, needle bearings, and integral wheel brake
• Carbonautica custom composite wheels (2) finished in black Awlgrip
• Emergency tiller

Description