1 / 7
1982 Classic Yacht Classic 50FT steel cutter
sail
used
Listed 0 days ago
Specifications
Make
Classic Yacht
Model
Classic 50FT steel cutter
Year
1982
Length
50.0ft (15.2m)
Beam
3.66m
Hull Material
steel
Engine
Yanmar 4JH3E (2002) 56 HP diesel engine, 3165 hours as of August 1, 2023, shaft drive to 3-bladed folding propeller
Fuel Type
diesel
Location
Ramsgate Marina, Kent, United Kingdom
Equipment & Extras
- Beam
- 3.66 metres
- Draft
- 0.00 metres
- Berths
- 7 (up to 6 in cabins, 2 additional from sofa seating)
- Category
- Used sail boat
- Max Speed
- 10.4 knots
- Displacement
- 18,000 kg
- Engine Hours
- 3165 hours (as of 1 August 2023)
- Cruising Speed
- 7 knots
- Length Overall
- 15.24 metres
- Tax/VAT Status
- Paid / Included
- Length Waterline
- 12.50 metres
- Fuel Tank Capacity
- 380 litres
- 2 x 55lb CQR Anchors
- 60m of 10mm anchor chain
- 100m of anchor warp
- Danforth Kedge Anchor with 40m chain and 30m warp
- Electric Windlass
- Danbuoys x 2
- Horseshoe buoys x 2
- Liferaft 6 person
- Fenders x 6
- Mooring Warps x 6
- 10ft Aluminium rib with 15hp outboard
- Raymarine C90W Chart Plotter with electronic charts
- Raymarine AIS Receiver/Transponder
- Raymarine Depth sounder
- Raymarine Speed/log
- Raymarine Wind indicator
- Raymarine Radar (new February 2026)
- Raymarine EV400 Autopilot with Hydraulic RAM
- Fleming Ocean 60 wind vane
- SSB with new antenna
- VHF/DSC M323
- Iridium Go Satellite phone
- Wilkins two-speed 26mm primary winches
- Harken 16mm secondary winches
- Lewmar reefing winch
- Barlow 26 mainsheet winch
- Hood Thorn burrow Mainsail
- Multiple Genoas and headsails
- Storm Jib
- Spinnaker with chute
- Twin spreader 15m aluminium mast
- Twin running backstays
- Furlex 300S roller furler
- Yanmar 4JH3E 56 HP diesel engine
- Twin alternators
- 2016 Pordesk IKW 240V Genset
- PUR Survivor water maker
- 4 x 12v 220AH gel batteries
- LED lighting throughout
- Victron 2kW battery charger
- 2 x 1kW solar panels
- Victron triple MPPT charge controller
- 100W swing mounted solar panels
- New wind generator
- 240v shore ring main system
- Seamless stainless steel galley worktop
- Stainless Voyager 4500 oven, grill and hob
- Cello 24 inch Smart TV
- Teak wash basin with shower
- Marine toilet
- Wide side decks
- Secure cockpit with doghouse
- Storage lockers throughout
- Jack Stays
- Manual and electric bilge pumps
- Fire Extinguishers x 4
- Radar Reflector
- EPIRB
Description
Remarks :Classic 50ft steel cutter for sale in Kent:Artic Explorer is a classic 50ft steel cutter that is currently berthed in Chatham Marina. She was built in 1982 as an ocean-going steel vessel with a cutter rig to a designed by Alan Mummery. This yacht has undergone an extensive refit over the past 4 years and is ready to go ocean sailing. It has 7 berths,a comfortable living area and is powered by a Yanmar 4JH3E (2002) 56 HP diesel engine with a shaft drive to a 3 bladed folding propeller. This boat boasts all the navigation and deck gear you would expect for a ocean going vessel and is ready to set sail. This vessel is UK Vat paid, and the owner is willing to deliver to Northern Europe or anywhere in the UK Currenbtly ashore as can be seen from the photo being antifouled, new anodes and having a new radar system fitted. Please call our Kent office +44 (0)1634 571605 to arrange a viewing.
Accommodation :This 50ft steel cutter provides berths for up to six people in 3 cabins, with a double cabin to aft portside and a large single berth to starboard. Forward is a large double berth with a large opening deck hatch which gives lots of light and makes the cabin feel very airy. The large concealed bar features a solid mahogany folding dining table with removable fiddles and sofa chairing. The seating can also be used to provide two further berths. These berths have appropriate tailored lee-cloths. There is a roomy navigation area with navigators chair and full sized navigation station desk with both red and white lights and under-table storage for navigation books etc. The galley is to port and has a seamless stainless steel worktop and has a pair of sinks with pressurised hot and cold water . Hot water heated by the engine and via a 240v immersion heater. There is a stainless Voyager 4500 oven, grill and hob with new gas pipes all fitted June 2024. A new Cello 24" Smart TV has also just been fitted June 2024. There is a large heads compartment with marine toilet with a featured teak wash basin (new 2023) with shower and hot/cold mixer tap and multiple storage lockers and handholds throughout. The yacht has wide side decks which provide a real sense of safety when walking around deck. The companion way steps lead up to the large and very secure cockpit which has a sold doghouse and lots of storage lockers.
Inventory :Deck Equipment: 2 X 55lb CQR Anchors 60m of 10mm anchor chain 100m of anchor warp Danforth Kedge Anchor with 40m of chain and 30m of warp Electric Windlass Danbuoys x 2 Horseshoe buoys x 2 Liferaft 6 person (new 2016 needs a service) Fenders x 6 Mooring Warps x6 10ft Aluminium rib with 15hp outboard by separate negotiation Navigation Equipment: Chart Plotter - Raymarine C90W with electronic charts European/Caribbean AIS Receiver/Transponder -Raymarine Depth - Raymarine Speed/log -Raymarine Wind -Raymarine - new May 2025 Radar - Raymarine new February 2026 Autopilot - Raymarine EV400 new 2024 with Hydraulic RAM Fleming Ocean 60 wind vane SSB (New SSB Antenna 2023) VHF/DSC M323 ( New in 2022) with command mic ST60 Iridium Go Satellite phone New Mast Antenna Safety Equipment: Fire Extinguishers x 4 Radar Reflector EPIRB Liferaft 6 person in need of a service Jack Stays Manual Bilge pump x 1 Electric Bilge pumps x 1 Electric Bilge pump x 1 Johnson SP4000 with float switch - new June 2024 Keel:Traditional long keel with tiller steering History and Construction:Artic Explorer Designed by Alan Mummery is a 50ft steel hull, cutter rig fin keel ocean going yacht. This yacht has had a major refit in the past four years getting her ready to complete in the next ARC. In 2017 the under went a full face lift, including a re-paint of the hull and topsides, some new seacocks, new prop, new prop shaft new engine mounts and lots more. Unfortunately, after all of this preparation for the adventure of a lifetime ill health is preventing the owner participating and hence why she is being advertised for sale. Currently ashore February 2026 being antifouled, anode changed and new radar fitted. Marine Insurance: As one the UK’s largest Brokers with over 700 boats for sale we are able to introduce you to Boat Insurance providers that offer all types of Boat Insurance including insurance for Yachts, Sailing Boats, Motor Cruisers, Narrowboats, Inland Waterway Craft, Barges, Houseboats, Speedboats, Rigid Inflatable Boats, Waterski Boats, Jet Skis, Personal Watercraft and Dinghies. Just click on the following link to request an insurance quote for this boat or your current boat: www.networkyachtbrokerskent.co.uk/marineinsurance/
Mechanical :Sails and Spars The rigging on board this Alan Mummery Steel Cutter includes a twin spreader 15m aluminium mast, with new 2022 twin running backstays and spare masthead sheaves. New Furlex 300S roller furler fitted May 2025. There are heavy-duty' granny bars' at the mast and it has mast steps to the top of the mast. A heavy duty bowsprit features twin rollers and a steel rod bobstay; there is also a spinnaker and jockey pole with sheets and guys. Nearly all of the running rigging is new, with ample spare ropes onboard, including Lewmar reefing lines. There are also 2016 Jackstays and Lazy jacks. There is an extensive sail wardrobe which includes: two mainsails - one fully battened, three reef, slab reefed to cockpit; three genoas - one high cut and one in bright orange made in 2021 with Arctic Explorer name and logo on it ; staysail; two spare Yankee genoas; storm staysail (hank on); cruising chute; spinnaker with new sheets and guys The deck of this Steel Cutter features a Heavy duty doghouse with reefing lines and main halyard led inside. Winches: Wilkins two-speed 26mm primary winches; Harken 16mm secondary winches; Lewmar winch for reefing lines in cockpit; Barlow 26 mainsheet winch in cockpit; Two mast winches; and one outhaul winch on boom. There are also a full suit of rope clutches Sails: Mainsail, Hood Thorn burrow - Slab (2002) Stack Pack, Fully Battened, 3 Reefs Headsail Thorn burrow - Furling (2002) Tri Sail (Unknown Year) Cutter (2009) Storm Jib (Unknown Year) Spinnaker (Unknown Year) Cruising Chute (2010) 2 x Genoas (2002) and (2021) Mechanical Systems: This Steel Cutter is powered by a Yanmar 4JH3E 56hp diesel engine.(2002) The boat is shaft-driven to a 3-bladed folding propeller . Fuel tank capacity is 380 litres in one mail tank and stowage for 10 external fuel cans. It has a cruising speed 7 knots and an approximate max speed of 10.4 knots . the engine has completed 3165 hours as 1st August 2023. The engine has twin alternators. The engine was last serviced in May 2025. The yacht is fitted with a 2016 Pordesk IKW 240V Genset new in 2021 with approx. 20 hours usage and a PUR Survivor water maker. Electrical Systems:The yacht has 4 x 12v 220AH gel batteries that were fitted new in April 2017 It has LED lighting and a number of 12v sockets throughout It has a VIctron 2kW battery charger and management system. There are 2 x 1kW movable solar panels and Victron triple MPPT charge controller and galvanic isolator. It has a 240v shore ring main system with RCD breakers, with fresh long run potential cords and new diodes, There is a pair of 100W swing mounted solar panels with a separate EP solar regulator and control display. New wind generator fitted May 2025.
Change History
1 event trackedNew listing appeared
via TheYachtMarket
4 hours ago
Financing Calculator
Financing Calculator
Estimate the true monthly cost of owning the 1982 Classic Yacht Classic 50FT steel cutter.
£
15%
(£9,743)
10%
50%
6.9%
4.9%
9.9%
Monthly Finance Payment
£638
£55,208 over 10 years at 6.9% APR
Monthly Running Costs (estimated)
Mooring / berthing
£542
Insurance
£81
Maintenance
£152
Fuel
£67
Running costs subtotal
£841/mo
True Monthly Cost
£1,479
Finance + running costs combined
Finance 43%
Running costs 57%
Total Interest
£21,372
Total Cost (finance)
£86,322
Can I afford this?
£
These are estimates for illustration only. Actual rates, terms, and running costs will vary. Always seek independent financial advice before committing to marine finance.
Looking for marine finance? We are working with finance partners to offer quotes directly. Check back soon.
At ~£638/mo, is this boat priced right?
Get the full deal report →Transport Cost Estimator
Transport Estimate
Estimate the cost of transporting the 1982 Classic Yacht Classic 50FT steel cutter to your marina.
Boat location
Ramsgate Marina, Kent, United Kingdom
Select your destination above to see transport estimates.
Indicative estimate only. Actual costs may vary. Road distances are approximated. Crane lift and haulage costs depend on boat weight, beam, and access. Always obtain quotes from specialist boat transport companies before committing.
Before you commit, get the full picture on this boat.
Get the Pre-Purchase Report →Is this boat a good deal?
Get the full price history, market comparison, and red flags, before you commit.
What this boat is actually worth, based on market data
What to offer: what similar boats actually sell for
Red flags to watch for: relisting history, unusual price movements, broker red flags
Whether the price will drop further, based on trajectory and seasonal data
How it compares to 10-20 similar boats, with prices to benchmark against
Full intelligence on a 5-figure purchase, for less than filling your fuel tank to go see it.
Get alerted if the price drops
Create a free account to track this boat and get notified when the price changes, new photos are added, or the listing is updated.
Sign up free to track this boatNo credit card required
Negotiation Tracker
Sign up for Pro to track offers, get market intelligence, and compare boats.
See Pro Features